Lowongan Kerja Quality Inspector Coatings Mcdermott Batam

Penerimaan Pegawai McDermott Batam. Jika Anda sedang mencari lowongan kerja bulan Februari 2025, maka Anda beradi di portal yang tepat. Ada banyak kategori lowongan yang bisa Anda lamar mulai dari lowongan kerja SMA SMK terbaru, hingga lowongan kerja S1. Sobat juga bisa mendaftar lowongan kerja online atau offline tergantung kualifikasi yang ditulis pada info lowongan yang kami di mencarikerja.net. Informasi lowongan kerja yang valid, berasal dari website resmi atau media sosial perusahaan yang berkaitan, dan yang pasti tidak ada pungutan biaya apa pun.

Loker McDermott Batam Februari 2025

Silakan teliti info lengkapnya berikut

The Quality Inspector applies their conceptual knowledge of inspection and, with a moderate level of guidance and direction from colleagues and leadership, is responsible for solving a range of straightforward inspection problems. They will be responsible for analyzing possible solutions using standard procedures and building knowledge of the company, processes, and customers. The Quality Inspector understands key business drivers and applies this knowledge to solve problems in straightforward situations by analyzing possible solutions using technical experience, judgment, and precedents.

Job Overview: 
Perform field inspection of coatings , pfp , insulation , TSA etc in accordance with project specification and scope as noted in the ITP. 
Review and familiarize with Project AFC drawing, vendor drawings, ITP, Work Instruction and Project specification
relating to assigned project. 
Execute the inspection and Quality Control activities on site, collecting the relevant objectives proofs, ensuring
monitoring and coordination of quality control activities on electrical and instrument equipment/system construction,
installation and mechanical completion activities. 
Conducting business & performing duties in accordance with McDermott’s " Code of Business Conduct" and any other
governing of the company.
Key Tasks and Responsibilities:
1. Read and to understand the Project Specification, applicable Codes and Standards, Procedures and Inspection and
Test Plan.
2. Calibration of inspection and test instruments, using coatings inspection and test instruments.
3. Enforcement and verification of work performed in accordance with specification, manufacturer recommendations
and coating procedure.
4. Measure ambient conditions, surface temperature and air quality requirements.
5. Inspect Type of blasting equipment and tools to be used
6. Inspect Type and size of blasting media.
7. Inspect metal surface imperfections / defects
8. Test indications of oil or water in compressed air.
9. Test analyses of water-soluble ionic contamination of blasting media.
10. Inspect pre-cleaning, solvent cleaning of surface, Mechanical surface preparation during pre-fabrication and onsite
portable centrifugal blasting, Open air blast cleaning, Vacuum blast cleaning, Hand and power tool cleaning.
11. Measure compressed air pressure.
12. Inspect degree of cleanliness required.
13. Measure surface profile of blast cleaned surface.
14. Assess surface cleanliness of blast cleaned surface.
15. Inspect coating material storage conditions.
16. Inspect type of coating material to be used.
17. Monitor thinning, mixing, induction time and pot life.
18. Inspect type of coating application equipment, Thermal Sprayed Aluminum, Passive Fire Protection, Self-leveling
compounds, Anti-skid deck coatings, Coated Hot Dip Galvanizing, Insulation and its acceptance.
19. Monitor application method, type and pattern.
20. Measure wet film thickness by notch gages.
21. Non-destructive measurement of dry film thickness of non-magnetic coatings / non-conductive coatings applied to
ferrous surface.
22. Monitor re-coating and final curing schedules.
23. Test discontinuities (holiday or pinholes) of coatings and linings.
24. Inspection of defects on coated surface.
25. Acceptable and unacceptable defects.
26. To stop non-conforming work and inform the production supervisor of required corrective rework.
27. Documentation of the daily inspection activities and other necessary activity as per the project requirement.

Professional Job Description
Job Title: Quality Inspector Job Function: Quality
Posting Title Quality Inspector Job Discipline Inspection (Qlty)
Job Code: 22004713 Job Grade: 06
FLSA Status
U.S. Only
N/A Job Ladder Level: P2 (Discipline*) 2

28. High standard of safe working practice, quality and productivity as well as compliance with the code of business
conduct.
Essential Qualifications and Education: 
Under graduated Degree / Senior High School 
8+ years Quality control or related experience in Weld, Paint, Material Electrical, Instrumentation,
Telecommunication and Equipment Inspection
Preferred Qualifications and Education:
Project / Area / Regional Specifics:
Company Overview and Core Values:
McDermott is a premier, fully-integrated provider of technology, engineering and construction solutions to the energy
industry. For more than a century, customers have trusted McDermott to design and build end-to-end infrastructure and
technology solutions—from the wellhead to the storage tank—to transport and transform oil and gas into the products the
world needs today.
At McDermott, we hold all employees accountable to follow our 5 core values. 
Integrity – we maintain a firm adherence to legal and ethical conduct 
One Team – we are one company, where everyone is equally important 
Go Beyond – we seek courageous and creative solutions 
Well-Being – we promote all forms of well-being 
Commitment – we are reliable and dependable in delivering quality solutions

• Determine product conformity to customer specifications through daily surveillances and ITP inspection points in accordance with the Project Quality Plan
• Identify non-conformity for rectification and ensure final resolution
• Appraise product quality to determine conformity and non-conformity in accordance with the approved drawings and inspection & Test Plan; All inspection results need to be documented, and if non-conformity exists, documentation shall be raised to establish corrective action
• Coordinate interface with Operations, Certifying Authority, Client, Job Sharing personnel, and subcontractor, assuring the conformity to project specifications
• Exercise a proactive approach to the prevention of a problem by interacting with Production, Engineers, and Management personnel
• Liaise with customer representatives, ensuring product conformity and stage release for each activity denoted within the Project Quality Plan/ITP

• High school diploma or degree in relevant field of study
• 5+ years of Quality Control or discipline-related experience with a degree and 8+ with a diploma
• Proficient in the use of computer and Microsoft programs

Cara Melamar :

Apabila Anda berminat dan sesuai dengan persyaratan Lowongan Kerja ini, silahkan kirimkan lamaran dan CV terbaru Anda melalui link berikut :

---

Apply Now »

---

Catatan :

• Hanya kandidat yang memenuhi kualifikasi yang akan dihubungi lebih lanjut.
• Segala proses rekrutmen tidak dikenakan biaya apapun.

Jika lowongan tadi belum sesuai dengan keingingan dan kualifikasi yang Anda miliki, Coba Anda melihat lowongan yang berhubungan di bawah ini.